manualshive.com logo in svg

Siemens SITRANS FUS1020, Руководство пользователя, Страница: 64 / 251

Поделиться
Скачать
Siemens SITRANS FUS1020 Скачать руководство пользователя страница 64

3-9

1020NFM-1D

Section 3

z

Using a flat blade screwdriver or 5/16” nutdriver, mount the Reference Mounting Track on pipe.
Install straps but do not tighten at this time (Figure 2). 

IMPORTANT: Make sure Reference

Index Screws on mounting tracks are facing toward each other.

z

Rotate the mounting track to the previously selected location on the pipe and fully tighten the
securing straps.

z

Place  a straight edge firmly on mounting track assembly (Figure 3). Draw a line out from the end
of the track. This line will be used to align the second mounting track assembly to the Reference
Mounting Track.

z

Install second mounting track assembly keeping securing straps loose (Figure 4). Rotate the
second assembly until its nearest corner aligns with the Reference Mounting Track and the line
drawn in the previous step.

Figure 2

Reference
Mounting Track
Assembly in
9 o’clock position

Strap Screw

Mounting Straps

Reference  Index

Screw (located under

mounting strap)

Figure 3

Figure 4

Line

Corner

Second

Mounting

Track

Reference
Mounting
Track

Содержание SITRANS FUS1020




























































































































































































































































Отзывы:

Нет отзывов