Siemens SITRANS FUS1020, Руководство пользователя, Страница: 126 / 251

6-4
1020NFM-1D Section 6
6.1.3 HOW TO CREATE/NAME A SITE SETUP
Use this command to create a new Site Setup. This is the first action required for an original installa-
tion. [Create/Name Site] inserts system defaults in all the appropriate menu cells. You can edit these
defaults as necessary to suit your needs.
You do not have to provide a site name in order to create a new Site Setup. You can create a site simply
by pressing the <Right Arrow> to access the menu cell entry field and then pressing <ENTER>. This
creates a “nameless” Site Setup. However, if you intend to use the meter’s multi-site storage facility,
you must enter a unique site name for each site setup you want to retain in site storage memory.
To create and name a new Site Setup:
To access the first character position press the <Right Arrow>.
On a PC keyboard, type the name of the new Site Setup (8 characters max.) and then press
<ENTER> to create and name the new site.
Press the <Up/Down Arrows>.to select a character, then press the <Right Arrow> to highlight to
next character position.
To select the second character press the <Up/Down Arrows>.
Repeat this process to select all the characters (8 max.) you want to use to identify the new Site
Setup.
To create the new Site Setup press <ENTER>.
NOTE: If you decide to use numbers in the site name, you can type these characters directly
from the PC keyboard.
6.1.4 HOW TO ENABLE/DISABLE SITE SECURITY
With Site Security enabled, the meter will require a password before it allows any activity that could
interrupt or affect system operation. You can still access the Installation Menu. However, Site Security
limits access to the viewing of parameters only. In other words, you will still be able to review site data,
but you will not be able to make any changes.
Activate Site Security with care. Once activated, the only way to deactivate it is via the Site Security
[Off] command. However, the cursor will not move to the [Site Security] option list until you enter the
correct password. Therefore, it is essential that you never forget or misplace the password. The only
way to deactivate Site Security without knowing the password is to return the unit to Controlotron.
However, the process the factory uses to remove Site Security will eliminate any existing site data as
well. Remember, your meter contains a Menu Enable switch which also provides this function.
To activate Site Security:
To access [Site Security] option list press the <Right Arrow>.
CAUTION: MAKE CERTAIN THAT YOU RETAIN A COPY OF THE PASSWORD IN A SE-
CURE LOCATION.