manualshive.com logo in svg

Siemens SITRANS FUS1020, Руководство пользователя, Страница: 204 / 251

Поделиться
Скачать
Siemens SITRANS FUS1020 Скачать руководство пользователя страница 204

7-15

1020NFM-1D

Section 7

Press the <Right Arrow> and then the <Down Arrow> to switch the option list to 

[Clr Active

Memory?    Yes]

. Press <ENTER> to clear all Active Site Data (but not saved Site Setups).

To restore operation, type: MENU and press <ENTER> to access the Installation Menu. Create
a new Site Setup or recall a stored Site Setup. Re-select any Meter Facilities items (e.g., RS-
232 setup parameters).

To clear ALL Dynamic Memory using the RS-232 Interface:

Turn off power (if it is currently on).

Turn power on. As soon as you apply power type the @ character three times. The prompt: 

[Clr

Saved Data?    Yes/No]

 appears at the top of the screen. Press the <Down Arrow>. Note that

the prompt switches to

 [Clr Saved Data?    No]

.

Press the <Right Arrow> and then the <Down Arrow> to switch the option list to 

[Clr Saved

Data?     Yes]

. Press <ENTER> to clear all Dynamic Memory.

To restore operation, type: MENU and press <ENTER> to access the installation menu. Create
a new site setup and complete the installation procedure. Re-select desired Meter Facilities
items (e.g., RS-232 setup parameters).

Содержание SITRANS FUS1020




























































































































































































































































Отзывы:

Нет отзывов