Siemens SITRANS F Series Скачать руководство пользователя страница 62

Страница: 62 / 362

Commissioning

6.6 Commissioning via local display

SITRANS F Ultrasonic flowmeters FST030 (Modbus)

Operating Instructions, 08/2017, A5E37367739-AC

Text

Options/Description

Medium settings

Select "Yes" to configure the medium.

Medium settings

Select the process medium.

Process parameters

Set the expected sound velocity (only available if custom process medi-

um is selected) and the process temperature, pressure, kinetic viscosity,

and density.

Note
Important!
The entry of fixed process kinematic viscosity and/or fixed process density in this menu will

be ignored for the following cases:
1.

One or more analog input are enabled and assigned to either "density" and/or "kinematic

viscosity". This overrides the corresponding fixed process values.

The Hydrocarbon table calculation for density and/or viscosity are enabled (applies only

to the Hydrocarbon meter variant). This overrides the corresponding fixed process

values.

Содержание SITRANS F Series











































































































































































































































































































































































Результаты поиска

Содержание SITRANS F Series

Отзывы:

Siemens SITRANS F Series, Руководство по эксплуатации, Страница: 62 / 362

Результаты поиска

Содержание SITRANS F Series

Отзывы: