Siemens SITRANS F Series Скачать руководство пользователя страница 351

Страница: 351 / 362

SIMATIC PDM

C.1 Commissioning with PDM

SITRANS F Ultrasonic flowmeters FST030 (Modbus)
Operating Instructions, 08/2017, A5E37367739-AC

349

C.1.10

Changing parameter settings using SIMATIC PDM

Note
For a complete list of parameters, see the Function Manual.
Clicking on Cancel during an upload from device to SIMATIC PDM will result in some

parameters NOT being updated.

Many parameters are accessed via the online menus in PDM, see Parameters accessed via

drop-down menus for the others.
1.

Launch SIMATIC PDM, connect to the appropriate device and upload data.

Adjust parameter values in the parameter value field then click on Enter. The status fields

read Changed.

Open the Device menu, click on Download to device, then use File

→ Save to save

settings offline. The status fields are cleared.

C.1.11

Parameters accessed via drop-down menus

Click on Device, View or Diagnostics to open the associated drop-down menus.

Содержание SITRANS F Series











































































































































































































































































































































































Результаты поиска

Содержание SITRANS F Series

Отзывы:

Siemens SITRANS F Series, Руководство по эксплуатации, Страница: 351 / 362

Результаты поиска

Содержание SITRANS F Series

Отзывы: