Siemens SITRANS F M TRANSMAG 2, Руководство по эксплуатации, Страница: 83 / 114

Parameters
SITRANS F M TRANSMAG 2
Operating Instructions, 11/2009, A5E00102775-07
81
2.5.1 Flow Simulation of a flow value; affects all
outputs, totalizers, limit values and
display.
"F" flashes in the top right of the display
during simulation and "Simulation" is
displayed under device status.
Value Simulation value in % of full scale value 0 % -110% to +110%
Time Duration of simulation
After expiration of this time or with input of
"End" the normal measuring mode is
resumed
End •
End
•
10 min
•
30 min
•
60 min
2.5.2 Dig. Out.1 Simulation of output signal at the digital
output 1
End •
End
•
0.1 Hz
•
1 Hz
•
10 Hz
•
100 Hz
•
1 kHz,
•
10 kHz
•
Alarm on
•
Alarm off
2.5.3 Dig. Out.2
1
Simulation of the output signal at the
digital output 2
End
•
Alarm on
•
Alarm off
2.5.4 Analog Out. 1, 2 Simulation of the output signal at the
analog output
4 mA •
0 mA
•
4mA
•
10mA
•
12mA
•
20mA
•
Failure signal
1)
Parameters apply only to devices with 20 mA/Hart communication and digital output 2 (7ME5034-0xxxx)
2) Parameters apply only to devices with 20 mA/Hart communication and digital input (7ME5034-2xxxx)