Siemens SITRANS F M TRANSMAG 2 Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 114

Siemens SITRANS F M TRANSMAG 2 Скачать руководство пользователя страница 65

Service and Maintenance

8.5 Technical support

SITRANS F M TRANSMAG 2
Operating Instructions, 11/2009, A5E00102775-07

63

8.5

Technical support

CAUTION

Repair and service must be carried out by approved Siemens Flow Instruments personnel

only.

Note
Siemens Flow Instrument defines sensors as non-repairable products.

Technical Support

If you have any technical questions about the device described in these Operating

Instructions and do not find the right answers, you can contact Technical Support:
● Via the Internet using the Support Request:

Support request (

http://www.siemens.com/automation/support-request

)

● Phone: +49 (0) 180 5050 222
Further information about our technical support is available in the Internet at

Technical support (

http://support.automation.siemens.com/WW/view/en/16604318

)

Service & Support on the Internet

In addition to our documentation, we offer a comprehensive knowledge base online on the

Internet at:
Service and support (

http://www.siemens.com/automation/service&support

)

There you will find:
●  The latest product information, FAQs, downloads, tips and tricks.
●  Our newsletter, providing you with the latest information about your products.
●  A Knowledge Manager to find the right documents for you.
●  Our bulletin board, where users and specialists share their knowledge worldwide.
●  You can find your local contact partner for Industry Automation and Drives Technologies

in our partner database.

● Information about field service, repairs, spare parts and lots more under "Services."

Additional Support

Please contact your local Siemens representative and offices if you have additional

questions about the device
Find your contact partner at:
Local contact person (

http://www.automation.siemens.com/partner

)

«
...
63
64
65
66
67
...
»

Содержание SITRANS F M TRANSMAG 2



















































































































Отзывы:

Нет отзывов