Siemens SITOP PSU3800 12 V/20 A Скачать руководство пользователя страница 102

Страница: 102 / 108

Applications

9.7 Battery charging with SITOP PSU3800

SITOP PSU8200/3800 3ph

102

Manual, 05.2018, C98130-A7638-A1-6-7629

9.7

Battery charging with SITOP PSU3800

The SITOP PSU3800 power supplies are optimized for charging lead batteries. For a U-I

characteristic curve set to parallel operation (DIP switch "A" at "ON", see Section Figure 2-6

Selector switch A/B (Page 18)), the battery to be charged is charged with a constant current

until approximately 95 % of the set SITOP output voltage is reached (set using a potentiometer,

see Section Figure 2-4 Potentiometer (Page 13)). The charging current then decreases

continuously from 1.2 × rated current at 95 % of the set voltage to approx. 0 A or the self-

discharging current of the battery at 100% of the set output voltage, i.e. the resistance

characteristic in this range (see Figure 6-15 Output characteristic 6EP3436-8UB00-0AY0

parallel operation (Page 66), Figure 6-16 Output characteristic 6EP3424-8UB00-0AY0

parallel operation (Page 66) and Figure 6-20 Output characteristic 6EP3437-8UB00-0AY0

parallel operation (B OFF) (Page 67))

Note
The value recommended by the battery manufacturer (dependent on the battery temperature)

must be set as end-of-charge voltage. A lead rechargeable battery temperature of 20 ... 30 °C

is ideal; in this case, the recommended end-of-charge voltage is normally approx. 13.5 or 27 V.

Note
As protection against back emf and as polarity reversal protection, we recommend that a

diode rated for at least 1.2 × rated current of the power supply with at least 40 V blocking

voltage is connected in series to the "+" output (connect the anode with "+" output of the

SITOP PSU8200/3800 and the cathode with the plus pole of the battery). The output voltage

of the power supply under no load must be set to the end-of-charge voltage plus the voltage

drop at the diode. For an end-of-charge voltage of, for example, 27.0 V DC (usual for 20 ... 30 °C

battery temperature, although the specifications of the battery manufacturer must always be

observed!) and 0.8 V voltage drop at the diode, the power supply without load should be set

to 27.8 V.

LEDs and a potential-free signaling contact indicate the associated charge state of the

battery (see Section Figure 2-5 Operating display and signaling (Page 15)):

Green LED ("12 V O.K.", "24 V O.K.") lit
Signaling contact (13, 14) closed

Battery voltage > approx. 10 V or > approx. 20 V

Yellow LED (OVERLOAD) lit
Signaling contact (13, 14) open

Battery voltage < approx. 10 V or < approx. 20 V

Содержание SITOP PSU3800 12 V/20 A













































































































Результаты поиска

Содержание SITOP PSU3800 12 V/20 A

Отзывы:

Похожие инструкции для SITOP PSU3800 12 V/20 A

Бренды по названию

Популярные бренды

Siemens SITOP PSU3800 12 V/20 A, Руководство пользователя

Результаты поиска

Содержание SITOP PSU3800 12 V/20 A

Отзывы:

Похожие инструкции для SITOP PSU3800 12 V/20 A

Бренды по названию

Популярные бренды