Installation Instructions PG-5412/MS-DOS, Windows
30
Installation Instructions PG-5412/MS-DOS, Windows
S79200-A0735-X-03-7419
Dual-Port RAM
Address Area
Each CP 5412 (A2) occupies a memory area of 16 Kbytes (or 64
Kbyte) during operation. The location of the area is set in the
configuration program.
Make sure that the memory you select is not used by any other
component in your system.
If you use a memory management program, for example EMM386,
you must inform the management program of the memory area
you are using. With EMM386, for example, you would either add
the following line to the CONFIG.SYS file
Device=C:\DOS\EMM386.EXE X=D000-D3FF
or modify the line if it already exists. For further options, please
refer to your operating system manual and the memory manager
you are using.
Memory
Requirements on
the Hard Disk
During installation, the space required by the software package is
displayed and the destination drive is checked to make sure there is
sufficient space.
☞