Siemens SIMATIC MV500, Руководство по эксплуатации

Страница: 78 / 148

Application
5.1 Program
SIMATIC MV500
78
Operating Manual, 05/2019, C79000-G8976-C495-02
Formatting instruction Meaning
%q<0 ... 35>
%Q<0 ... 33>
(depending on verification
standard)
Formatting instructions with lowercase "q" represent the quality values, uppercase "Q" the
quality grades. For some verification standards, there are quality values without an assigned
grade, and there are also grades without a numerical value. Grade and value formatting
instructions not used in the active verification standard cause format errors. Quality grades
are output with one digit, quality values with four digits.
If a verification error occurs and if the decoder option "Evaluate 'Poor' evaluation as 'N_OK'"
is disabled, the letter 'E' is output instead of the quality grades and the four-digit error code
(47xx) is output instead of the quality values. You will find a description of the verification
error messages in the operating instructions in the section "Read and verification error mes-
sages".
Only for verification according to ISO/IEC 15416
With the exception of the overall quality, width, height, aspect ratio 1 to 3 and angle, all val-
ues and grades are output ten times, once per scan line. All quality formatting instructions
specified in an uninterrupted sequence are sorted according to the scan line and semicolons
are inserted between the grades (or values). A \r (carriage return) is added before and after
each scan line.
Example:
•
Formatting instruction: "%Q0#%Q1%Q25#%Q24"
• Output: "Overall quality#\rSymbol contrast1;Edge determination1;\rSymbol con-
trast2;Edge determination2;\r[...]Symbol contrast10;Edge determination10;\r#\rScan
line1;\rScan line2;\r[…]Scan line10;\r"
%Qt Verification type Verification type (exposure settings not
conforming to standards or uncalibrated
verification)
ISO/IEC 29158 1 B
ISO/IEC 15415 2 C
AS9132 A 3 D
ISO/IEC 16022 4 E
Siemens DPM 5 F
ISO/IEC 15416 6 G
%Qs Quality evaluation:
•
1: Poor
• 2: Fair
•
3: Good