Siemens SIMATIC MV500, Руководство по эксплуатации

Страница: 101 / 148

Application
5.1 Program
SIMATIC MV500
Operating Manual, 05/2019, C79000-G8976-C495-02
101
Menu command or
parameter
Description
Cycle time
• The processing time required for the code currently being read.
For the program currently being output:
the time from the internal trigger to the end of processing minus the time in
which the image is buffered.
If the size of the image buffer is > 1, images are buffered during scanning,
program sequence and individual trigger.
•
Min.: Minimum of the processing times of all the codes read since the last
startup
• Max.: Maximum of the processing times of all the codes read since the last
startup
•
Average: Average of the processing times of all the codes read since the last
startup
• Too short: Absolute and relative number of image processing procedures in
which the set high limit of the cycle time was exceeded.
X position X position of the center point of the first result relative to the center of the image.
Normalized to the full resolution for the current image.
Y position Y position of the center point of the first result relative to the center of the image.
Normalized to the full resolution for the current image.
Roll angle Roll angle of the center point of the first result for the current image corresponds
to a counterclockwise rotation.
Viewing angle (ID-
Genius decoder
for DMC only)
Angle between the sensor axis and the surface of the code field for the current
image. Ideally, this angle is 90°.
Smallest cell spac-
ing (ID-Genius
decoder for DMC
only)
Smallest cell spacing in pixels for the current image.
Distance to border
(ID-Genius de-
coder for DMC
only)
Smallest distance of a code boundary to the image border for the current image.
The value specified here is multiplied by the mean cell spacing.