Siemens SIMATIC Ident RF360M Скачать руководство пользователя страница 66

Страница: 66 / 94

"SIMATIC Mobile Reader" app

5.4 Functions of the UHF app variant (RF660M)

Mobile reader SIMATIC RF360M/RF660M

Operating Instructions, 08/2022, C79000-G8976-C660-02

Via the Info buttons, you can read out detailed information on the identified transponders in

each case.

Table 5- 18 Detailed information and parameters

Information/
parameter

Description

Chip model

Display of the chip model of the selected transponder

Vendor

Display of the chip manufacturer of the selected transponder

Properties
Extended tag

identification

Indication of whether the transponder supports these functions.

Security command
File support

Procedure

Follow the steps below to find out the position of a transponder:
1.

Press the "Update" button to start scanning.
If necessary, repeat the scan operation if the desired transponder was not detected.

From the transponder list, select the EPC ID of the transponder whose position you want to

locate.
Reaction: The selected EPC ID is transferred to the "Tag to be located" input box.

Via the option buttons, select whether the complete EPC ID of the detected transponder

matches that of the selected transponder exactly or whether only part of the EPC ID has to

match.

If you selected the "Starts with..." option:
In the "Tag to be located" input box, enter the part of the EPC ID that needs to match the

selected transponder.
When searching for multiple transponders with the "Starts with ..." option, note that you

can only remove digits starting from the end of the EPC ID.

Press the "Locate" button to start searching.
Reaction: The view changes to search mode.

Now move through the room with the reader while moving the reader.
As soon as the reader identifies the selected transponder, this is signaled both optically

and acoustically. The reader shows the received RSSI signal strength with which the target

transponder was identified. Based on the displayed signal strength, you can "work your

way" to the selected target transponder and locate it.
Note: The localization operation is automatically stopped after 118 seconds to avoid

overheating of the head module.

Содержание SIMATIC Ident RF360M































































































Результаты поиска

Содержание SIMATIC Ident RF360M

Отзывы:

Похожие инструкции для SIMATIC Ident RF360M

Бренды по названию

Популярные бренды

Siemens SIMATIC Ident RF360M, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC Ident RF360M

Отзывы:

Похожие инструкции для SIMATIC Ident RF360M

Бренды по названию

Популярные бренды