Siemens MTP1000 Unified Comfort Скачать руководство пользователя страница 37

Страница: 37 / 178

Mounting and connecting the device

3.2 Mounting the device

Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA

3.2.3

Fastening the built-in device with mounting clips

Requirement

●

All packaging components and protective films have been removed from the device.

●

The following material and tools are available:
–

The mounting clips from the accessory kit

–

One torque screwdriver with cross-tip insert, size 2

Procedure

Note
If the mounting seal is damaged, the degree of protection is not guaranteed.

Insert the device into the mounting cutout from the front.

Make sure that all four spring locks on the top and bottom of the device fully engage. If

necessary, gently press the device into the recess if it is not fully engaged.

Содержание MTP1000 Unified Comfort



















































































































































































Результаты поиска

Содержание MTP1000 Unified Comfort

Отзывы:

Похожие инструкции для MTP1000 Unified Comfort

Бренды по названию

Популярные бренды

Siemens MTP1000 Unified Comfort, Руководство по эксплуатации

Результаты поиска

Содержание MTP1000 Unified Comfort

Отзывы:

Похожие инструкции для MTP1000 Unified Comfort

Бренды по названию

Популярные бренды