Siemens MOBY ES030-K, Руководство пользователя, Страница: 90 / 100

6AW5451-6XX01-1K ES 030-K Manual
9 - 2
Subject to change without prior notice
RD: 08.2000
(4)J31069-D0136-U001-A0-7618
9.3 Using ESCOPY
Two modes of operation are available to the ESCOPY user:
- batch call
- dialogue operation
9.3.1 Batch Call
User area under PCP/M
PCP/M drive (A, B, or C)
File name, corresponding to S5 convention
Table: Batch Call of PCOPY
Using PCOPY, a newly created, modified, or appended STEP5 file must first be copied from the PCP/M partition to
MS-DOS (only required if the STEP5 file was written under PCP/M).
This PCOPY call transfers the S5 file
“
ES@@@@ST.S5D" from the PCP/M partition (user = 6 of hard disk drive C) to the
current MS-DOS directory.
PCOPY (n) (LW) : (file name.s5d) Call:
Example: PCOPY 6C: ES@@@@ST.S5D
Comment File Name
Commands
Serial interface
Table: Batch Call of ESCOPY
Read data block from the ES 030 RAM
ESCOPY
ESCOPY
0
1
2
3
4
1 or 2
1 or 2
1 or 2
1 or 2
1 or 2
Transfer of the S5 file located in
MS-DOS to the ES 030 using the
selected interface
Request bookkeeper of all blocks in the
ES 030
Read ES 030 user memory and store in
an MS-DOS file
Erase ES 030 user memory
*)
The complete path name (including drive) can be specified in the batch mode .
When specifying a drive (A: or B:), ensure that drive is ready (insert diskette).
MS-DOS file name
*)
S5 file name
*)
1 = COM1
2 = COM2
ESCOPY
ESCOPY
ESCOPY
Reset the ES 030 and start the user
program
F 1 or 2 ESCOPY
DB number