manualshive.com logo in svg

Siemens MD-BMED, Руководство пользователя, Страница: 94 / 122

Поделиться
Скачать
Siemens MD-BMED Скачать руководство пользователя страница 94

Appendices
Appendix D - Installing Firmware Updates for the MD-BMS and MD-BMED Power Meter

94
Building Technologies

125-202

06/06/2017

Using the Optional Visual Display to Verify Real-Time Values

(MD-BMED Model Only)

The MD-BMED Power Meter has a two-line × 16-character backlit visual display that

enables you to read real-time values directly from the meter. It has two rows of 16

characters that auto cycle between informational screens every two to three seconds,

with real-time values updated every second. Click the Hold button (located on the side

of the meter) to stop the cycle until it is clicked again, or until a set timeout is reached.

Some information such as protocol, CT type, Volts, Aps, Kw, PF and so on, is

displayed during each cycle. See

Appendix H for complete cycle information.

This Real-Time Values data is for data monitoring and verification only.

Содержание MD-BMED



























































































































Отзывы:

Нет отзывов