manualshive.com logo in svg

Siemens MD-BMED, Руководство пользователя, Страница: 26 / 122

Поделиться
Скачать
Siemens MD-BMED Скачать руководство пользователя страница 26

Prepping for Installation
Connecting a Communication Cable

26
Building Technologies

125-202

06/06/2017

Keep in mind that the Ethernet connection must have an IP address in the ViewPoint

software that can either be set manually within the software with the Use Static IP

Address option (for a fixed address) or obtained automatically from the router

connected to the logger using the Use DHCP option (dynamic address). Both options

have advantages, see

About IP Addresses.

NOTE:

When Ethernet is connected, any RS-485 connection is deactivated. To activate the

RS-485 interface, the MD-BMS or MD-BMED Power Meters must be power cycled

with the Ethernet cable removed.

1. Select Ethernet (TCP/IP) to gather information using a network connection. When

selected, the Communications Setup screen changes, and an IP address is

required as address switches are ignored.

2. Select your mode of communication.
3. Do one of the following:

●

  Enter the IP address for the Ethernet connection of the meter or select one of the

previously used addresses from the drop-down list. See

About IP Addresses.

●

  Use the Scan Network or Setup buttons to acquire a new IP address. See

About IP

Addresses.

Содержание MD-BMED



























































































































Отзывы:

Нет отзывов