manualshive.com logo in svg

Siemens MAGNETOM Skyra, Руководство пользователя, Страница: 27 / 124

Поделиться
Скачать
Siemens MAGNETOM Skyra Скачать руководство пользователя страница 27

Safety information for the system owner

0.0

A.1-15

0.0

syngo MR D13

0.0

A.1

Examination room and ambient 
conditions

A.1

Explosion protection

A.1

The MR system is not intended for operation in areas prone to 
explosive anesthetic gases.

A.1

Emergency switches

A.1

The voltage to the MR system can be turned off via a Power-Off 
(

System Off

 or 

Emergency Shut-down

) switch installed 

on-site. The switch can be used to stop the scan immediately in 
case of emergency. The room installation must correspond to 
VDE 0100-710 and/or national laws.

A.1

A quench can be released with the 

Magnet-Stop

 switch. This 

switch is installed on-site as well.

A.1

Air conditioning   

A.1

An air conditioning system must be used to ensure the required 
environmental conditions. (

➡

Technical data)

A.1

A.1

The functions of the air conditioning or the temperature and rel-
ative humidity of the examination room must be checked at reg-
ular intervals. 

A.1

The air conditioning is installed on-site by the system owner. 
It is not part of the MR system. Information with respect to 
maintenance (e.g. replacing filters) and monitoring the 
functions of the air conditioning are included in the operat-
ing instructions of the air conditioning manufacturer.

Содержание MAGNETOM Skyra





























































































































Отзывы:

Нет отзывов