manualshive.com logo in svg

Siemens MAGNETOM Skyra, Руководство пользователя, Страница: 119 / 124

Поделиться
Скачать
Siemens MAGNETOM Skyra Скачать руководство пользователя страница 119

Operator Responsibilities for Maintenance

11

© Siemens, 2009

M7-000.664.01.04.02

Page 11 of 14

MAGNETOM 

03.12

CS SD MR

  

Preventive maintenance

The purpose of preventive maintenance is to keep unforeseen failures to a minimum. This 
satisfies the prerequisites for system compliance with the guaranteed, long-term charac-
teristics.

The effects of different operating conditions (full or partial load operation, temperature, 
size of dust particles, humidity, gases, vapors) are checked and the condition of parts sub-
ject to wear is determined by recording and analyzing characteristic values. Preventive 
measures must be adopted or repairs must be undertaken as appropriate.

The specified maintenance intervals correspond to the minimum requirements. Compli-
ance with stricter national legislation may occasionally be necessary.

Object or function

Reason

What is checked:

Interval

Cooling system

Preventive measure to 
avoid overheating

Check for leaks and condensation

Check/replace water filter

Check water pressure and add water if 
necessary

Annually

Air filters, fans

Preventive measure to 
avoid pollution

Replace air filter

Check functionality of fans

Annually

Chiller (option)

Preventive measure to 
avoid overheating

1

1

Содержание MAGNETOM Skyra





























































































































Отзывы:

Нет отзывов