BA 9213 en 03/2012
7.
Startup
Observe the instructions in section 3, "Safety instructions"!
7.1
Procedure before startup
7.1.1
Removal of preservative agent
•
Unscrew and open oil drain plug and drain remaining preservative agent or runningin oil from the
housing into a suitable container and dispose of in accordance with regulations. Any residualoil drain
plugs should also be opened. The location of the oil draining point is marked by an appropriate symbol
in the dimensioned drawing in the gearunit documentation.
Remove any oil spillage immediately with an oilbinding agent.
•
Screw the oil-drain plug in.
1
2
3
4
Fig. 9:
Oil inlet/oil drain gear unit
1
Inspection cover / oil inlet
3
Air filter
2
Oil dipstick
4
Oil-drain plug
A detailed view of the gear unit can be obtained from the drawings in the gearunit documentation.
Before startup, replace the yellow plastic plug with a breather screw with cap
(see also notice on gear unit).
The oil must not come into contact with the skin (e.g. the operator’s hands).
The safety notes on the data sheets for the oil used must be observed here!
