BA 9142 en 02/2015
NOTICE
Property damage
Damage to the sliding bearings is possible.
The input shaft of the gear unit may be rotated maximally 1 time for positioning during installation, only
when the tilting pad thrust bearing chamber is filled with oil up to the specified level.
•
Remove the corrosion protection from all of the preserved surfaces using a suitable cleaning agent.
NOTICE
Property damage
Damage from inadequate stability of the gear unit is possible.
The gear unit must be set up on a level, secure, vibration-free and rigid foundation. The levelness of
the gear unit set-up surface is especially important, as the contact pattern of the teeth and the carrying
portion of the axial tilting pad thrust bearings depend on it and the service life of the gear unit is affected
by it.
Clean the gear unit and foundation set-up surface.
DANGER
Danger to life
Danger to life from load falling down due to deficient attachment.
Do not stay underneath suspended loads.
When attaching, lifting, lowering and shifting the load, pay attention to the following:
– Observe the load limits.
– Proper fastening of the attachment equipment.
– Centre of gravity possibly being off centre.
– Even load distribution on load-bearing equipment with multiple load hook-ups.
– Low process speed.
– Oscillating the load and/or attaching the load to objects
or building parts is prohibited.
– Load hooks may not be loaded at their tip.
– Set down products only on even, non-slipping and stable underground.
CAUTION
Risk of injury from chemical substances
Observe manufacturer’s instructions for handling lubricants and solvents.
Wear suitable protective clothing.
WARNING
Serious personal injury
Risk of personal injury from inflammation caused by solvent steams during cleaning work.
Observe also the following:
– Keep away from sources of ignition.
– Do not smoke.
– Ensure adequate ventilation.
