Siemens ET 200M, Руководство пользователя, Страница: 59 / 284

8-Channel Analog Input MTA
Marshalled Termination Assemblies for ET200M Remote I/O Modules
A5E00482820-12 59
5.11.2 Inputs
Select appropriate module hardware configuration settings.
Select
Measuring Type and Measuring Range settings to match the input signal
connected to the channel inputs.
Figure 5-5 shows the all the diagnostic boxes checked.
Figure 5-5 8-Channel Analog Input Hardware Configuration: Inputs Setup
Note
• Use the AI8 MTA I – V jumpers to select voltage or current input signals.
• Use the AI8 MTA 2 – 4 jumpers to select 2-wire or 4-wire mode.
• Configure the AI8 module to match the input signal type.
• See Figure 4–1, Item 11, for the location of the I - V Jumper and item 12
for the location if the 2 – 4 jumper.