Siemens ACUSON Freestyle Скачать руководство пользователя страница 96

Страница: 96 / 138

5-6

ACUSON

Freestyle User Manual

Scanning

Wireless Probe Operation

To operate the system probe in wireless mode, insert a charged probe battery pack into the

probe.

NOTE:

The battery pack is keyed to prevent improper connection. Do not use force

when inserting the probe battery pack.



Probe and battery; line up battery connectors with probe connectors

With the system power ON, turn the probe on by continuously pressing the two circular on-

probe buttons. When power has been turned on for the probe, you will hear a beep from the

probe. The system and the probe will automatically connect.

Connecting More Than One Wireless Probe

To use more than one probe in wireless mode during an exam:
1.

Turn the first probe off by continuously pressing the two circular on-probe buttons, thereby

disconnecting it from the console.

2. Connect to the second probe.

NOTE:

If a Probe is connected to the console with the probe Cable Adapter, you

will need to disconnect it to make a wireless connection to another probe. You can

disconnect it either at the probe or the console end.

Содержание ACUSON Freestyle











































































































































Результаты поиска

Содержание ACUSON Freestyle

Отзывы:

Siemens ACUSON Freestyle, Руководство пользователя, Страница: 96 / 138

Результаты поиска

Содержание ACUSON Freestyle

Отзывы: