Siemens ACUSON Freestyle Скачать руководство пользователя страница 137

Страница: 137 / 138

ACUSON

Freestyle User Manual

8-11

Connectivity

Freestyle Mobile Link App

NOTE:

Images displayed using the App are for informational purposes only and are

not intended for diagnostic use.

For instructions on using the Mobile Link App on a mobile device, see the instructions provided

with the App.

Freestyle Mobile Link Settings

Freestyle Mobile Link App Settings

Function

Instructions

Additional Information

Enable Mobile Link

Select:

SETUP

SYSTEM

ADMIN

Check the Enable Mobile App checkbox.

The App links using the WiFi connection.

When the Mobile Link App is

Enabled

, the

mobile symbol appears on the console

imaging screen:

To disable the Mobile Link, uncheck the box.

Set Security

PIN Code

Note that the PIN code specified here must

also be entered on the Windows mobile

device in order to link to the Freestyle.

Select:

SETUP

SETTINGS

NETWORK

Go to the Mobile Link section.
Select: PIN Code.
Enter a four-digit PIN Code.

After entry, the PIN code is not displayed.

Confirm Port

Number

The port number entered for the Freestyle

must be the same as the number entered in

the App.

If the port number is changed, the Freestyle

must be restarted.

Activate New Patient

Study from App

After sending patient study information from

the App, select

NEW PATIENT

WORKLIST

Highlight the patient entry and select

Create

Study

—

Содержание ACUSON Freestyle











































































































































Результаты поиска

Содержание ACUSON Freestyle

Отзывы:

Siemens ACUSON Freestyle, Руководство пользователя, Страница: 137 / 138

Результаты поиска

Содержание ACUSON Freestyle

Отзывы: