Siemens ACUSON Freestyle Скачать руководство пользователя страница 38

Страница: 38 / 138

2-18

ACUSON

Freestyle User Manual

Safety and Care

WARNING:

Connecting peripheral devices to accessory outlets on the ultrasound system

effectively creates a medical electrical system, resulting in a reduced level of safety.

WARNING:

No modification of this equipment it allowed.

WARNING:

Do not remove system covers. There are no operator serviceable parts

inside. Refer servicing to qualified personnel.

WARNING:

To avoid the risk of electrical shock and fire hazard, inspect the system

probes and console on a regular basis for any damage to the enclosure, controls,

connectors or display, and do not use if damaged. Electrical safety tests must also be

performed at regular intervals as specified by local safety regulations, or as needed.

WARNING:

To avoid the risk of electrical shock do not touch the probe battery recharging

contacts on the system console.

CAUTION:

To avoid the possibility of static shock and damage to the ultrasound system,

avoid the use of aerosol spray cleaners on the monitor screens.

CAUTION:

Do not use spray cleaners on the ultrasound system, as this may force

cleaning fluid into the system and damage electronic components. It is also possible for

the solvent fumes to build up and form flammable gases or damage internal components.

CAUTION:

Do not pour any fluid onto the ultrasound system surfaces, as fluid seepage

into the electrical circuitry may cause excessive leakage current or system failure.

CAUTION:

To ensure proper grounding and leakage current levels, it is the policy of

Siemens to have an authorized Siemens representative or Siemens approved third party

perform all on board connections of documentation and storage devices to the ultrasound

system.

CAUTION:

To avoid the risk of electrical shock and fire hazard, inspect the system

probes and console on a regular basis for any damage to the enclosure, controls,

connectors or display, and do not use if damaged. Electrical safety tests must also be

performed at regular intervals as specified by local safety regulations, or as needed.

EMC Note:

Proximity to sources of strong electromagnetic fields, such as radio

transmitter stations or similar installations may lead to interference visible on the monitor

screen. However, the device has been designed and tested to withstand such interference

and will not be permanently damaged.

CAUTION:

Total system chassis risk current should not exceed 100 microamps.

CAUTION:

Do not position the system to make it difficult to disconnect the power cable

connector/plug.

CAUTION:

If the probe overtemp or probe battery overtemp message appears, the

system will stop imaging and the image will be frozen.

Unfreeze

will not function until the

overtemp condition terminates.

Содержание ACUSON Freestyle











































































































































Результаты поиска

Содержание ACUSON Freestyle

Отзывы:

Siemens ACUSON Freestyle, Руководство пользователя, Страница: 38 / 138

Результаты поиска

Содержание ACUSON Freestyle

Отзывы: