Siemens ACUSON Freestyle Скачать руководство пользователя страница 135

Страница: 135 / 138

ACUSON

Freestyle User Manual

8-9

Connectivity

Configuring a Modality Worklist Server

To configure a DICOM Modality Worklist Server:
1.

Go to

SETUP

SETTINGS

DICOM

WORKLIST

Select

NEW

3. Enter the DICOM Worklist information as described in the following table.

DICOM Worklist Fields

Field

Description

Alias

Name you define for the server.
Limited to 16 characters.

IP Address

The IP address of the Server.

AE Title

Identifies the server application that receives worklist messages from

the ACUSON

Freestyle. The alphanumeric characters entered in this

field must exactly match (including case) the

Application Entity

name

assigned to the server application.
Limited to 16 characters; cannot include the period (“.”) character.

Port Number

The remote port on the server that is to receive the worklist messages.
The default is port 104.

Test

Used to test the connection once you have entered the configuration

data. You can test using either Ping or C-Echo (DICOM Verify). Ping

tests the connection across the network; C-Echo additionally tests that

the DICOM server is active.
For security reasons, some network and network servers are set up

not to respond to Ping or C-Echo commands. Check with your IT

department or PACS Administrator to determine how your network

handles these functions.

NOTE:

If you enable Worklist but your DICOM server does not support this feature,

the system will not perform the Worklist function.

Содержание ACUSON Freestyle











































































































































Результаты поиска

Содержание ACUSON Freestyle

Отзывы:

Siemens ACUSON Freestyle, Руководство пользователя, Страница: 135 / 138

Результаты поиска

Содержание ACUSON Freestyle

Отзывы: