Siemens ACUSON Freestyle Скачать руководство пользователя страница 125

Страница: 125 / 138

ACUSON

Freestyle User Manual

7-5

Batteries

Inserting the Battery into the Probe

To insert a charged battery pack into a probe:
1. Place the metal contact side facing into the well on the probe with the label facing down

and the metal contacts towards the back of the probe.

CAUTION:

The battery pack is keyed to fit into the probe in the proper orientation. Do not

use excessive force in inserting the pack into the probe. Make sure that you have lined it

up properly when inserting.

CAUTION:

Use only your fingers to insert and remove the battery pack from either the

probe or the charging ports. Do not use tools. Use of tools may damage the battery pack

Monitoring the Battery Charge Level while Scanning

During live scanning, monitor the charge level status of the probe battery by observing the

probe battery (“P”) symbol and the system console battery (“S”) on the screen.
The green portion of the battery symbol represents the estimated charge remaining. Typically,

a fully-charged probe battery will provide approximately one hour of scanning.

NOTE:

The estimated charge remaining is an approximation, and numerous factors,

such as scanning mode and battery age can affect its accuracy.

When the probe battery charge level goes below 20%, the light on the probe changes to

amber.

On-screen display of the

robe battery charge level (shown partially charged),

ystem battery charge level (shown

fully charged), and the

ystem power plug symbol (when the system console is plugged into an AC Mains power outlet

instead of running on battery power)

Содержание ACUSON Freestyle











































































































































Результаты поиска

Содержание ACUSON Freestyle

Отзывы:

Siemens ACUSON Freestyle, Руководство пользователя, Страница: 125 / 138

Результаты поиска

Содержание ACUSON Freestyle

Отзывы: