Siemens ACUSON Freestyle Скачать руководство пользователя страница 50

Страница: 50 / 138

2-30

ACUSON

Freestyle User Manual

Safety and Care

Caring for Probes

WARNING:

During neurosurgical procedures, if a probe becomes contaminated with

tissue or fluids of a patient known to have Creutzfeldt Jakob disease, the probe should be

destroyed as it cannot be sterilized.

CAUTION:

Probes are sensitive instruments — irreparable damage may occur if they

are dropped, knocked against other objects, cut, or punctured. Do not attempt to repair or

alter any part of a probe, contact your local Siemens representative.

CAUTION:

To avoid cable damage, do not roll the ultrasound system over probe adapter

cables.

CAUTION:

To avoid damage to the probe, do not use probe sheaths containing an oil

based coating or petroleum or mineral oil based ultrasound coupling agents. Use only a

water based ultrasound coupling agent.

CAUTION:

Follow all instructions provided by manufacturers of sterile goods (probe

sheaths) to ensure proper handling, storage, and cycling of all sterile goods.

CAUTION:

Take extreme care when handling or storing probes. They must not be

dropped, jarred, or knocked against other objects. Do not allow probes to come into

contact with any sharp edged or pointed object.

Protective Case

Due to the mechanical sensitivity of probes, Siemens recommends that you always use the

probe case when you ship a probe or transport it from one place of examination to another. The

case is specially designed to protect the sensitive parts of the probe. Be sure that all parts of

the probe are properly placed inside the case before you close the lid.

Storage

Store probes in a clean and dry environment. Extreme temperatures or humidity may damage

a probe.

Repair

Do not attempt to repair or alter any part of the probe. Contact your service representative at

Siemens immediately if a probe appears to be damaged or malfunctions in any way.

Содержание ACUSON Freestyle











































































































































Результаты поиска

Содержание ACUSON Freestyle

Отзывы:

Siemens ACUSON Freestyle, Руководство пользователя, Страница: 50 / 138

Результаты поиска

Содержание ACUSON Freestyle

Отзывы: