Siemens ACUSON Freestyle Скачать руководство пользователя страница 44

Страница: 44 / 138

2-24

ACUSON

Freestyle User Manual

Safety and Care

Important Information for Maintaining Data Integrity

CAUTION:

To prevent corruption of data stored on inserted media, do not interrupt the

exporting process. Do not delete exported patient data from the local database until the

exporting process is complete and the inserted media is determined to be full (or no more

exporting is planned for the inserted media).

■

To prevent the loss of data that results from power failures and other system “down”

occurrences, you must archive important data, such as patient records, onto a network or

an external recording medium, such as a USB, or DICOM storage device.

■

Loss of data is to be expected and its retrieval is not normally possible under the following

conditions: loss of power to the ultrasound system, hard disk failure, CPU failure, system

lockup, and other similar causes.

■

Should an abnormal system shutdown occur, retrieval of data not saved to the hard disk or

not archived to an external recording media is not normally possible.

■

An abnormal system shutdown occurs if you do not power off the ultrasound system using

the power on/off key located on the control panel. Other examples of abnormal system

shutdown include:

– Equipment malfunction

– Loss of power

– Accidental removal of the power cord

– Pressing and holding the power on/off switch longer than four seconds

■

Should an abnormal system shutdown occur, the system may initially require additional

time to reboot or to respond to user input.

Содержание ACUSON Freestyle











































































































































Результаты поиска

Содержание ACUSON Freestyle

Отзывы:

Siemens ACUSON Freestyle, Руководство пользователя, Страница: 44 / 138

Результаты поиска

Содержание ACUSON Freestyle

Отзывы: