manualshive.com logo in svg

Siemens ACUSON Freestyle, Руководство пользователя, Страница: 126 / 138

Поделиться
Скачать
Siemens ACUSON Freestyle Скачать руководство пользователя страница 126

7-6         

ACUSON

 Freestyle User Manual

Batteries

Low Battery Alerts

A pop-up message on the console will alert you when the probe battery approaches 

approximately 20% of remaining power. 
You should then take action to avoid an interruption to the exam:

1. 

Freeze

 the image.

2.  Turn the probe off.
3.  Replace the probe battery with a fresh battery.
4. 

Turn the probe on and resume the exam.

Alternatively, you can begin using the probe cable connector or proceed to promptly complete 

the exam. 

When the system battery approaches 10% the battery alert message will be repeated. Shortly, 

following that, the probe will automatically shut down. When the 10% remaining charge 

message appears, you should take action so as not to interrupt the exam. 

When the system is plugged into AC Mains power, if the console batteries require recharging, 

and probe batteries are inserted into the onboard charging ports and also require recharging, 

the system will give higher priority to recharging the probe batteries.

Содержание ACUSON Freestyle











































































































































Отзывы:

Нет отзывов