manualshive.com logo in svg

Siemens ACUSON Freestyle, Руководство пользователя, Страница: 75 / 138

Поделиться
Скачать
Siemens ACUSON Freestyle Скачать руководство пользователя страница 75

ACUSON

 Freestyle User Manual  

3-7

Setup

System

The System page provides access to information about your product’s hardware and software 

configuration as well as installed options, including the following:

 

■

Battery Status and Charge Levels for the system (console), left and right charger bays, and 

the active probe

 

■

System information including:

 

– System serial number

 

– Software version number

 

– License number

 

– Installed options 

 

– Subsystem circuit board information 

 

■

Image Controls (see “Setting Image Controls” and “Removing Patient Information from 

Images”).

 

■

Administrative Options: for more information see, “Administrative Options” on page 3-8.

Getting Help and Service Support 

Press the 

HELPDESK

 Soft Key to enter contact information for your local Service support 

representatives. Your Siemens Service Representative may access additional system 

information from the Helpdesk page. 

Closing the Active Page

To close the active page select the 

CANCEL

 option.

Setting Image Controls

Using the cursor and the Trackball, click on the slider tab using the left Trackball key to adjust 

the following: 

 

■

Image Size

:  use the drop-down box to select the image size. 

 

■

Cine Playback

: set the length of time of multi-frame cine loops played back in real-time 

scroll memory.

 

■

Monitor Brightness

: move the slider bar to adjust the brightness of the monitor.

 

■

Capture Quality

: set the quality of JPEG-captured images. 

 

– For higher quality images, move the slider bar to the right.

 

– For lower quality images, move the slider bar to the left.

Removing Patient Information from Images

The 

Study Anonymity

 option allows you to remove patient information from images saved 

as either JPEG or DICOM. Make the scan anonymous by excluding either the Patient ID 

(Identification), the Patient Name, or both. 

Default setting

: the anonymizing features are 

turned off; Patient Name and ID are displayed on saved images. 

NOTE: 

These settings do not remove the Patient Name and ID from the DICOM data stored with the 

study. 

Содержание ACUSON Freestyle











































































































































Отзывы:

Нет отзывов