Siemens 1FW6092-2PC15-6AB3, Руководство по настройке

Страница: 31 / 300

Description of the motor
2.3 Technical features and ambient conditions
1FW6 High Speed built-in torque motors
Configuration Manual, 01/2020, 6SN1197-0AE03-0BP3
29
WARNING
Injury and material damage by not observing machinery directive 2006/42/EC
There is a risk of death, serious injury and/or material damage if machinery directive
2006/42/EC is not carefully observed.
• The products included in the scope of delivery are exclusively designed for installation in
a machine. Commissioning is prohibited until it has been fully established that the end
product conforms with machinery directive 2006/42/EC.
•
Please observe all safety instructions and provide these safety instructions to the end
user.
Please take note of national and international license terms when operating direct motors so
that no patent rights are violated.
2.3 Technical features and ambient conditions
2.3.1 Directives and standards
Standards that are complied with
The motors of the type series SIMOTICS S, SIMOTICS M, SIMOTICS L, SIMOTICS T,
SIMOTICS A, called "SIMOTICS motor series" below, fulfill the requirements of the following
directives and standards:
● EN 60034-1 – Rotating electrical machines – Dimensioning and operating behavior
● EN 60204-1 – Safety of machinery – Electrical equipment of machines; general
requirements
Where applicable, the SIMOTICS motor series are in conformance with the following parts of
EN 60034:
Feature Standard
Degree of protection EN 60034-5
Cooling
1)
EN 60034-6
Type of construction EN 60034-7
Connection designations EN 60034-8
Noise levels
1)
EN 60034-9
Temperature monitoring EN 60034-11
Vibration severity grades
1)
EN 60034-14
1)
Standard component, e.g. cannot be applied to built-in motors