7
PJC211/212/221/222
2.0.2 - 2013
Battery indicator.
From 8.5V to 12V for 12V thrusters,
15V to 24V for 24V thrusters
Motor temperature indicator.
From 70°C to 130°C
INDICATORS FOR DC Thrusters
:
INDICATORS FOR AC Thrusters
:
INDICATORS FOR Hydraulic Thrusters
:
Motor temperature indicator.
Hydraulic oil temperature indicator.
INDICATORS FOR Retractable Thrusters
:
Symbol shown when the thruster deploys
Symbol shown when the thruster retracts
Symbol shown when the thruster is in
position OUT
When the thruster is deployed and no
input is given via the joysticks/buttons
over a 10 second period, the panel will
give a audible signal every 10th second
to tell that the truster is still deployed.
Thrust power and direction, Bow thruster(s)
Input from bow joystick on this panel.
The thrust indicator will be shown in this position on a single
joystick panel if the thruster is defined as a bow thruster
Indicating amount of thrust set by other control units in the
system, i.e additonal PJC panels, 8700 Retract panel, input
via 8730 S-link external switch interface, S-link remote con-
trol etc.
If two or more units is set to run the thruster in
opposite direction, this information will not be shown.
FIRST TIME SETUP
After installation of a S-link thrusters system, a System Setup procedure to setup control panels, thrusters and
additional equipment must be completed (ref. procedure on page 10) before the system can be used.
Thrust power and direction, Stern thruster(s)
Input from stern joystick on this panel
The thrust indicator will be shown in this position on a single
joystick panel if the thruster is defined as a stern thruster.
Battery indicator.
From 8.5V to 12V for 12V thrusters,
15V to 24V for 24V thrusters
Motor temperature indicator.
From 70°C to 130°C
Symbol shown when a DC Thruster is
used in a dual bow or dual stern setup:
INDICATORS showing thrust direction and amount
:
Содержание S-link PJC-212
Страница 21: ...21 PJC211 212 221 222 2 0 2 2013 Measurements ...
