Side-Power S-link PJC-212 Скачать руководство пользователя страница 16

Страница: 16 / 24

PJC211/212/221/222

2.0.2 - 2013

INFO

INFO

Move between menu items with the (stern) joystick.

Press the button below

to select the highlighted menu entry.

Press the button below

to return to the previous menu.

THRUSTER INFO
Display info about the thusters in the system

The number of thrusters/controllers found is shown in the upper

right corner of the display.
Use (stern) joystick to move between the installed devices.

Press the button below

to select the highlighted menu entry.

Press the button below

to return to the previous menu.

The list of devices found can fill more than one screeen. A scroll bar

indicates the position of the selected item.

The joystick(s) operates the thrusters as normal while info is dis-

played, this will be useful for troubleshooting, service and general

system diagnostics.

Panel INFO
Display info about the control panel

FW: Version number, Firmware

HW: Version number, Hardware

S/N: Serial number of the control panel

Voltage: S-link system voltage measured at the panel
Press the button below

to return to the previous menu.

PPC800 (DC Speed Control)

SR150000 (Control unit for SRV80/SRV100/SRV130/SRV170/SRV210/SRH)

SR61242 (Control unit for SR80/SR100)
Motor Temp: Temperature measured at the electric motor brushes

(Not implemented in SR61242)

Contr. Temp: Temperature measured inside the controller

(Not implemented in SR61242)

Voltage:

Motor Voltage measured at the controller

Thrust:

Thrust level from joystick/hold buttons

A/kW:

Motor Current and Effect reading measured at the

controller (PPC800 only)

Press the button below

to return to the previous menu.

PHC024 (Controller for hydraulic thrusters)

Oil Pressure: Oil pressure measured at system oil tank

Oil Temp: Temperature measured inside the oil tank

Bow Thrust: Thrust level from joystick/hold buttons

Stern Thrust: Thrust level from joystick/hold buttons

FW:

Version number, Firmware

S/N:

Serial number of the PHC 024

Press the button below

to return to the previous menu.

PDC100 (Controller for AC electric thrusters)

Motor Speed: RPM on motor output shaft

Motor Temp: Temperature measured in motor

Thrust:

Thrust level from joystick/hold buttons

Press the button below

to return to the previous menu.

Содержание S-link PJC-212

























Результаты поиска

Содержание S-link PJC-212

Отзывы:

Похожие инструкции для S-link PJC-212

Бренды по названию

Популярные бренды

Side-Power S-link PJC-212, Инструкция по установке и эксплуатации

Результаты поиска

Содержание S-link PJC-212

Отзывы:

Похожие инструкции для S-link PJC-212

Бренды по названию

Популярные бренды