15
PJC211/212/221/222
2.0.2 - 2013
SETUP cont.
RCRS-1 (S-Link Radio Remote Receiver)
Move between parameters with the (stern) joystick.
Press the button below
to return to the previous menu.
Press the button below
to edit the selected parameter.
Parameter value will start to blink, use joystick to alter value.
Press the button below
to save edited parameter to device
Press the button below
to cancel editing without saving.
BOW/STERN Thrust
Values: 0-100% (Default 75%)
Set the amount of thrust given by the remote control.
In a bow/stern configuration, try to balance the thrust so that the
boat moves straight sideways when both thrusters are operated
simultanously with input from the remote only.
MSI8730 (S-Link Interface)
Move between parameters with the (stern) joystick.
Press the button below
to return to the previous menu.
Press the button below
to edit the selected parameter.
Parameter value will start to blink, use joystick to alter value.
Press the button below
to save edited parameter to device
Press the button below
to cancel editing without saving.
Thrust
Values: 0-100% (Default 75%)
Set the amount of thrust given by the remote control.
In a bow/stern configuration, try to balance the thrust so that the
boat moves straight sideways when both thrusters are operated
simultanously with input from the remote only.
Location
Values: BOW/STERN/BOW-STB/STERN-STB
Set the location for selected device. Use BOW or STERN in a conven-
tional thruster system. In a system with two bow or stern thrusters
(i.e a catamaran), use BOW or STERN for port thruster, BOW-STB or
STERN-STB for starboard thruster
HOLD CALIBRATION
Calibrates the HOLD-function to get balanced thrust from the bow
and stern thruster.
To start calibration, press the “+”-Hold button in the desired direc-
tion. For a first time calibration, the thrusters will start at 70%.
A system previously calibrated will start with the last amount of
thrust set.
One step on the Hold-button represents 1/6 if the calibrated value.
Adjust power with the joystick.
Press the button below
to save the calibration values.
Press the button below
to cancel calibration without saving.
Содержание S-link PJC-212
Страница 21: ...21 PJC211 212 221 222 2 0 2 2013 Measurements ...
