17
PJC211/212/221/222
2.0.2 - 2013
DEFAULT
DEFAULT SETTINGS
Reset all settings to factory default - follow instructions on screen
Press the button below
to confirm reset
The following parameters/values will be set to the factory settings:
Language = English
Backlight Level = 5
Backlight Night Color = Green
Backlight Nightlevel =1
Timer Auto-Off = 05 min
Hold Calibration =70% Bow and Stern
All system devices will be erased from memory.
(Setup procedure must be followed to reconfigure the system)
PANEL
PANEL SETUP
Move between parameters with the (stern) joystick.
Press the button below
to return to the previous menu.
Press the button below
to edit the selected parameter.
Parameter value will start to blink, use joystick to alter value.
Press the button below
to save the edited parameter.
Press the button below
to cancel editing without saving.
BACKLIGHT LEVEL
Values: 1-5
Set level of panel backlight in daylight mode. 1 is lowest inten-
sity, 5 is the highest.
BACKLIGHT NIGHT COLOR
Values: GREEN, BLUE, RED, WHITE
Select color of backlight in nightlight mode
BACKLIGHT NIGHT LEVEL
Values: 1-3
Set level of panel backlight in daylight mode, 1 is lowest inten-
sity, 3 is the highest.
TIMER AUTO-OFF
Values: OFF, 01-60 min
Set the time from last use to auto panel shutdown.
Set from 1-60 minutes in 5 minute steps (1 minute steps from 1
to 5 minutes) or OFF (panel will not turn off automatically)
UNIT TEMPERATURE
Values: CELSIUS, FAHRENHEIT
Set the panel temperature displaying unit
Содержание S-link PJC-212
Страница 21: ...21 PJC211 212 221 222 2 0 2 2013 Measurements ...
