5
Mounting
5.1
Required materials
You need the following additional materials to mount the device:
•
Grounded mounting rail (pre-assembled)
•
Pre-assembled cable (max. 20 m) with M8 female connector (
•
One or more signal sources (e.g. WLL180T)
•
Small slotted screwdriver
5.2
Preparing the mounting location
1.
Mount a grounded mounting rail in the same area as the application.
2.
Lay the pre-assembled cable so that it can easily be connected to the connections
of the device. Use cable channels, cable ties or strain-release clamps if necessary.
5.3
Scope of delivery
•
WI180C-IOA00
•
Quick start guide
5.4
Mounting procedure
1.
Carefully unpack the device.
1
2
1
2
2.
Clamp the device onto the mounting rail, as shown in the illustration.
3.
Clamp the series-connected devices onto the mounting rail as shown in their
mounting instructions.
4.
Push the series-connected devices onto the 5-pin connection on the left side of
the device. Make sure they are connected in the correct order when doing so
1)
.
5.
Mount the connected devices onto the mounting rail and ensure there are no
spaces between them.
1)
refer to the operating instructions for the respective device
MOUNTING
5
8025143/2020-01-23 | SICK
O P E R A T I N G I N S T R U C T I O N S | WI180C-IOA00
11
Subject to change without notice
