GENERAL SETTINGS tab
The GENERAL SETTINGS tab can firstly be used to specify the function of the MF multi‐
functional pin (pin 2). It can also be used to select the process data structure:
•
5 measured values from the up to 16 available modules can be chosen (AO1 ...
AO5). In this case, all switching signals of the up to 16 modules are included in the
process data.
•
7 measured values from the up to 7 available modules can be chosen (AO1 ...
AO7). In this case, only the switching signals of the first 7 modules are included in
the process data.
BUS OVERVIEW tab
The BUS OVERVIEW tab provides a visual representation of the current module configu‐
ration. If applicable, any errors in the configuration are displayed, for example if the
modules are arranged in an incorrect sequence.
MODULE SETTINGS tab
The MODULE SETTINGS tab displays the available parameters and process data for
each connected module.
7
OPERATION
22
O P E R A T I N G I N S T R U C T I O N S | WI180C-IOA00
8025143/2020-01-23 | SICK
Subject to change without notice
