manualshive.com logo in svg

SICK SIG200, Руководство по эксплуатации

Поделиться
Скачать
SICK SIG200 Скачать руководство пользователя страница 89

GET/devices/{deviceAlias}/parameters/{parameterName}/subindices/{subParame‐
terName}/value

POST/devices/{deviceAlias}/parameters/{parameterName}/subindices/{subParame‐
terName}/value

Reading and writing individual IO-Link device parameters via the parameter name.
Requires correct IODD for the connected device.

Query parame‐
ters

Type

Description

format

Enum
[“byteArray”/
“iodd”]

Selection of the parameter data structure. Either as 

byte

array

 (default) or according to the data structure and

typing stored in the IODD. Requires prior upload of the
correct IODD.

7.4.7

SICK-specific REST API (deprecated)

7.4.7.1

Error messages

The table below contains all defined status codes, messages and a detailed descrip‐
tion:

Table 23: Status codes/messages of SICK-specific REST API (deprecated)

Code

Message

Description

0

Ok

The request was processed successfully.

1

Parsing
failed (analy‐
sis failed)

Error when analyzing the incoming JSON object.

2

Invalid data

Data specified for variable is invalid

3

Internal
Server Error

General error message issued when an unexpected condition has
occurred and no more specific message is suitable. Note: The Message
property may contain more details about the error condition.

4

Access
denied

The request was valid, but the server refuses to respond due to an
access violation. In the event of a variable access, it is possible that
the variable is defined as read-only.

5

Not found

Variable or method could not be found.

6

Out of range The value does not fit into the value field or is too large, e.g. a value

that exceeds or falls below the permitted minimum or maximum value
for this variable.

7

Out of
bounds (out
of the per‐
missible
range)

An array was accessed whose maximum length was exceeded.

9

Illegal value

A data condition was violated or the enum value passed was out of
range.

10

Invalid chal‐
lenge

The challenge used has expired or is unknown.

11

Port not
available

The desired IO-Link port cannot be accessed:

•

Incorrect parameterization

•

Missing IO-Link device

12

Communica‐
tion error

The desired IO-Link port does not provide a communication channel:

•

Read incoming/outgoing process data if not available

SIG200 CONFIGURATION 

7

8017853.1D0S/2021-11-04 | SICK

O P E R A T I N G   I N S T R U C T I O N | Sensor Integration Gateway - SIG200

89

Subject to change without notice

Содержание SIG200



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды