manualshive.com logo in svg

SICK SIG200, Руководство по эксплуатации

Поделиться
Скачать
SICK SIG200 Скачать руководство пользователя страница 51

7.3.5

CONFIGURATION

 page (parameterization)

The 

CONFIGURATION

 (parameterization) page is divided into four tabs: 

Gateway

, 

PROFINET

Settings

, 

IO-Link Ports

 and 

IO-Link Devices

.

On the 

Gateway

 tab, the Ethernet settings such as the IP address or the subnet mask

can be changed. In addition, PROFINET I&M data is displayed.

The Profinet Settings define the size and structure of the Profinet process data for the
Logic Editor.

On the 

IO-Link Ports

 tab, the port parameterization for ports S1 to S4 can be changed.

In addition, an IODD file can be uploaded from your computer and assigned to one of
the SIG200 ports (S1 to S4). Therefore, the IODD XML file and the referenced device
image must be packed into a ZIP archive. This follows the same convention used by
the IO-Link community (

IODD Finder

) and is the preferred method for retrieving the

corresponding device IODDs. In addition, the single IODD can be uploaded as XML file.

Other settings such as the minimum cycle time or the assignment of port designations
can also be made on this page.

On the IO-Link Devices tab there is a page for each IO-Link port (S1-S4). This tab
displays the IODD view, device info and parameter data for each IO-Link device. The
page visualization when an IODD was already uploaded to the user interface is different
to the visualization of the IO-Link device without uploaded IODD file. For a more conven‐
ient use it is recommended to upload the relevant IODD file for the IO-Link devices.

Figure 14: 

CONFIGURATION

 page (parameterization)

7.3.5.1

Gateway

The Ethernet settings can be configured on the 

Gateway

 tab.

SIG200 CONFIGURATION 

7

8017853.1D0S/2021-11-04 | SICK

O P E R A T I N G   I N S T R U C T I O N | Sensor Integration Gateway - SIG200

51

Subject to change without notice

Содержание SIG200



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды