SICK OD5000-C15 Series Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 94

background image

The default value is 192.168.0.100.

Addressing mode

This field is used to select either a static IP address or DHCP.

Subnet mask

The device subnet mask is defined in this field.

The default value is 255.255.255.0.

Standard gateway

The standard gateway of the device is defined in this field.

The default value is 0.0.0.0.

7.3.11.3

Synchronization settings (synchronizing multiple sensor heads)

Synchronization mode

If several sensor heads are used in the application, they can be synchronized using the
settings described here.

One sensor head

is selected by default. To use two sensor heads,

a drop-down menu is displayed with the following prompt:

Table 20: Configuration options: Synchronization mode

Setting

Meaning

Synchronous

Synchronizes several sensor heads

Anti interference 1/2

Switches between two sensor heads

The following should be considered when using these modes:

In synchronization mode, the measurement results from two sensor heads are recorded
simultaneously. This can be used, for example, to measure the thickness of non-trans‐
parent objects using two sensor heads. The individual results from the sensor heads
must be accounted for using special control software, which is not possible with the
SOPASair configuration software.

In

Anti interference

mode, the measurement results from several sensor heads are

recorded one after the other. This increases the measurement time to double the sam‐
pling duration for that measurement. This can be in used, for example, in an application
in which the laser beams overlap a pair of sensor heads.

To use this mode, the following settings must be made:

1.

Define one device as a master and the others as slaves,

see "Network settings",

.

2.

Set

Anti interference 1

for the master.

3.

Set

Anti interference 2

for the slave.

✓

The devices will now take measurements one after the other.

Accurate time synchronization

A PD5000 is defined as a time server in this field. This allows the internal clock within
all the connected devices to be synchronized precisely via the standardized precision
time protocol (PTP). To use this function, one device must be defined as a master. All
the other devices must be defined as a slave.

This procedure is necessary when

Synchronous

or

Anti interference

is set as the synchro‐

nization mode.

OPERATION

7

8021391/17Y6/2020-05-11 | SICK

O P E R A T I N G I N S T R U C T I O N S | OD5000

57

Subject to change without notice

«
...
55
56
57
58
59
...
»

Содержание OD5000-C15 Series































































































Отзывы:

Нет отзывов

Похожие инструкции для OD5000-C15 Series

AWPH360N - PAN/TILT HEAD

Бренд: Panasonic Страницы: 48

Бренд: Can-Am Страницы: 16

Бренд: Dacor Страницы: 4

Бренд: Harken Hoister Страницы: 12

Бренд: Farenheit Страницы: 8

Бренд: i-onik Страницы: 6

Бренд: KEDO Страницы: 2

Бренд: KEDO Страницы: 3

Бренд: KEDO Страницы: 2

Бренд: R&G Страницы: 22

Бренд: R&G Страницы: 8

Walimex Pro Operator

Бренд: walser Страницы: 24

PowerStation Plus

Бренд: Mophie Страницы: 19

Бренд: Uniden Страницы: 8

Бренд: Magicshine Страницы: 2

Power Commander III 718-411

Бренд: Dynojet Страницы: 3

Бренд: DMP Electronics Страницы: 4

THINKPAD A30P -

Бренд: IBM Страницы: 88

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды