Chapter
4
Operating Instructions
miniTwin2
34
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
8013482/YT85/2016-02-23
Subject to change without notice
Mounting
How to mount the L
C
Fix bracket:
Mount the bottom L
A
Fix bracket ( ) with end piece ( ) fitted on the mounting surface
such that the Twin-Stick is at the correct height.
Mount the mounting plate ( ) for the top L
A
Fix bracket such that the Twin Stick
protrudes at the top by up to 1 mm.
From a size of 420 mm use two fixing screws per mounting plate, to obtain increased
protection against twisting of the L
A
Fix bracket.
Fit the end piece ( ) for the L
A
Fix bracket to the top end cap on the Twin Stick.
Fasten the screws for the L
A
Fix bracket ( ) to a torque of approx. 1.5 Nm, to obtain an
adequate bracket clamping force.
Recommendation
Fig. 24: Mounting of the
miniTwin2 with L
@
Fix bracket
