manualshive.com logo in svg

SICK MARSIC200, Техническая информация

Поделиться
Скачать
SICK MARSIC200 Скачать руководство пользователя страница 40

Figure 21: Menu “Test gas Table” – Edit (example)

1

Test gas number (cannot be changed).

2

 = this test gas can be used for adjustments/validations.

3

Test gas name (free text field, max. 20 characters).

4

Boolean variable to control this test gas (cannot be changed).

5

 = the sample gas pump is switched off automatically when this test gas is

used.

6

 = this test gas can be used for the specified component.

7

Tag of the component for which this test gas is to be used.

1

8

Component name in the Sensor module (cannot be changed).

9

Setpoint value of the test gas in the physical unit of the measuring component.
▸ Use the decimal point (.) for numerical values.

ß

Wait time after switching to the test gas. The measurement for the adjust‐
ment/validation first starts after the flush time/wait time.

2

à

Cuvette: Concentration of the adjustment cuvette

á

 = the test gas is used for zeo point validations.

Simultaneous use for reference point validations is not possible.

â

 = the test gas is used for reference point validations..

Simultaneous use for zero point validations or reference point validations with
adjustment cuvette is not possible.

ã

 = the test gas is used for zero point adjustments.

Simultaneous use for reference point adjustments is not possible.

ä

 = the test gas is used for reference point adjustments.

Simultaneous use for zero point validations or reference point validations with
adjustment cuvette is not possible.

5 

ADJUSTMENT FUNCTIONS

40

T E C H N I C A L   I N F O R M A T I O N | MARSIC200

8017324/15A2/V6-0/2019-10 | SICK

Subject to change without notice

Содержание MARSIC200





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды