SICK LSI 101, Техническое описание

Страница: 59 / 72

59 SICK LSI Technical Description - 06/98
Fault code: Cause / What to do:
144 Initialization error on channel 1:
Contact SICK Service.
145 Initialization error on channel 2:
Contact SICK Service.
160 Internal error:
Switch power off and back on again.
Replace the LSI, or contact SICK Service.
161 Measurement tolerance of incremental encoders exceeded by more than 25%:
Check connections of incremental encoders.
162 Directional values of incremental encoders different:
Check connections of incremental encoders.
163 Undefined input combination:
Check configuration of input conditions.
164 Internal error:
Switch power off and back on again.
Replace the LSI, or contact SICK Service.
165 Wrong order of monitoring case switching:
Check setting of order in configuration (see section 9.4).
180 Error in sensor 1:
Switch power off and back on again.
Interrogate sensor fault memory (see section 9.15).
Replace the sensor, or contact SICK Service.
181 Error in sensor 2:
Switch power off and back on again.
Interrogate sensor fault memory (see section 9.15).
Replace the sensor, or contact SICK Service.
182 Error in sensor 3:
Switch power off and back on again.
Interrogate sensor fault memory (see section 9.15).
Replace the sensor, or contact SICK Service.
183 Error in sensor 4:
Switch power off and back on again.
Interrogate sensor fault memory (see section 9.15).
Replace the sensor, or contact SICK Service.
200 Same levels at input A:
Check input levels at input A1 and A2. Levels must be inverse to each other.
201 Same levels at input B:
Check input levels at input B1 and B2. Levels must be inverse to each other.