SICK LSI 101, Техническое описание

Страница: 53 / 72

53 SICK LSI Technical Description - 06/98
9.15 Interrogate fault memory
(system diagnosis)
If your LSI is not functioning as you would like it, you can
interrogate the fault memory of the LSI in a number of different
steps to localize possible faults.
The fault table in section 10.2 will tell you what to do then to
rectify the fault.
Initial fault diagnosis
As the first step you can carry out a simple diagnosis to localize
faults.
•
From the menu choose LSI - Diagnosis .
This dialog box appears.
•
Click on ”Run”.
The diagnosis is carried out and the window displays information
on the current status of your LSI system.
The fault codes are given in the bottom section of the list
display. To find out what the fault codes mean, and whether you
can rectify the fault yourself, refer to the fault table in section
10.2.
If necessary you can also carry out a second diagnosis to get
more detailed information. The more detailed diagnosis is
described in the following.
Interrogate LSI fault memory
•
From the menu choose LSI - SICK Diagnosis .
This dialog box appears.
·
• Make sure zero is entered as the device address and ”LSI”
as the device type, and confirm with ”OK”.
(This assumes the device address has not yet been
changed. If you have assigned the LSI a different address,
you must enter the changed address accordingly here.)
The ”Run Diagnosis” dialog box appears. In it you will find various
telegrams with which you can execute additional commands and
functions.