SICK LSI 101, Техническое описание

Страница: 54 / 72

54 SICK LSI Technical Description - 06/98
•
In the list of available telegrams select the ”Read fault
memory” telegram and click on ”Add”.
•
Select the ”Read sensor status” telegram and click on ”Add”.
The two telegrams are now entered one under the other in the
list of telegrams for diagnosis.
•
Click on ”Run”.
The fault memory of the LSI and the sensor status are read, and
the result log is displayed in the box at the bottom of the screen.
You can find out what the listed fault codes mean from the fault
table in section 10.2.
You can add supplementary information to the result log, print it,
or save it as a file.
Enter supplementary information:
•
Click on ”Input” and enter the text you want. Your text is then
appended to the result log.
Print result log:
• Click on ”Print”.
Save result log as file:
•
Click on ”Save” and enter a file name and destination
directory/folder.
Note:
When you have rectified the fault reset the LSI: choose
LSI - Initialize .
Or execute the ”Reset and initialization” telegram in the SICK
diagnosis.
The LSI system is then restarted.
Interrogate sensor fault memory
In some cases it may be necessary to interrogate the fault
memory of a sensor directly.
• From the menu choose LSI - Sick Diagnosis and enter zero
as the device address and ”LSI” as the device type, as
described above. Click on ”OK”.
The ”Run Diagnosis” dialog box appears.
• Insert the following telegrams in sequence in the list of
telegrams to be executed:
– ”Switch mode: Diagnosis mode”
– ”Set device and address”
– ”Read fault memory”
– ”Read sensor status”
– ”Set device and address”
•
Click on ”Run”.