SICK LSI 101, Техническое описание

Страница: 58 / 72

58 SICK LSI Technical Description - 06/98
Fault code: Cause / What to do:
110 Measurement telegram error sensor 1:
Check wiring between LSI and sensor 1.
Interrogate sensor fault memory (see section 9.15) , or contact SICK Service.
111 Measurement telegram error sensor 2:
Check wiring between LSI and sensor 2.
Interrogate sensor fault memory (see section 9.15) , or contact SICK Service.
112 Measurement telegram error sensor 3:
Check wiring between LSI and sensor 3.
Interrogate sensor fault memory (see section 9.15) , or contact SICK Service.
113 Measurement telegram error sensor 4:
Check wiring between LSI and sensor 4.
Interrogate sensor fault memory (see section 9.15) , or contact SICK Service.
114 Initialization error sensor 1:
Check wiring between LSI and sensor 1.
Check that connected sensor type matches configured type. Reconfigure LSI, or contact SICK
Service.
115 Initialization error sensor 2:
Check wiring between LSI and sensor 2.
Check that connected sensor type matches configured type. Reconfigure LSI, or contact SICK
Service.
116 Initialization error sensor 3:
Check wiring between LSI and sensor 3.
Check that connected sensor type matches configured type. Reconfigure LSI, or contact SICK
Service.
117 Initialization error sensor 4:
Check wiring between LSI and sensor 4.
Check that connected sensor type matches configured type. Reconfigure LSI, or contact SICK
Service.
118 Protective field configured too large:
Adapt size of protective field to sensor type.
120 Contamination on sensor 1:
Check and clean front screen of sensor.
121 Contamination on sensor 2:
Check and clean front screen of sensor.
122 Contamination on sensor 3:
Check and clean front screen of sensor.
123 Contamination on sensor 4:
Check and clean front screen of sensor.
140 - 143 Internal error:
Switch power off and back on again.
Replace the LSI, or contact SICK Service.