SICK Lector 620 Скачать руководство пользователя страница 133

Страница: 133 / 166

ONLINE HELP SOPAS

Chapter

LECTOR®620

Parameters

8013778/Y269/2013-11-27

133

5.10.10.1.3

Device ID

The

Device ID

parameter displays the device ID that was assigned under

Network/Interfac-

es/IOs

. The device is assigned a unique number in the network in the form of the device ID.

The assigned ID is used as a CAN node for the CAN bus.

The device must be clearly identified on the network to enable communication via CAN bus
and to assign reading results to devices.

5.10.10.1.4

Data transmission rate

The maximum transmission rate can be adjusted via the

Data transmission rate

parameter.

The value is provided in bits/s.

All devices in the CAN network must be operated at the data transmission rate. The ma-

ximum length of cable for the network is dependent on the data transmission rate.

5.10.10.1.5

Output format

An output format is assigned to the interface via the

Output format

parameter.

Output formats are defined under

Data processing

5.10.10.1.6

Enable heartbeat

If the

Enable heartbeat

parameter is activated, a signal is output via the interface at regular

intervals (

Heartbeat interval

). The availability of the reading device can therefore be chek-

ked via the interface.

5.10.10.1.7

Heartbeat interval

The

Heartbeat interval

parameter is used to define the time between the heartbeat signals

in seconds.

5.10.10.1.8

Restart interval on sending

If the

Restart interval on sending

parameter is activated, the time between the heartbeat

signals starts again after output of the reading results.

5.10.10.1.9

Mask for digital input

A filter for the digital input bits that is used to integrate the device into a second fieldbus for
assigning the data is entered via the

Mask for digital input

parameter.

Example: All bits are active when 0xFFF is entered.

To assign the digital CAN input bits, see

COB ID RPDO digital input

Содержание Lector 620







































































































































































Результаты поиска

Содержание Lector 620

Отзывы:

Бренды по названию

Популярные бренды

SICK Lector 620, Онлайн руководство пользователя

Результаты поиска

Содержание Lector 620

Отзывы:

Бренды по названию

Популярные бренды