manualshive.com logo in svg

SICK Lector 620, Онлайн руководство пользователя

Поделиться
Скачать
SICK Lector 620 Скачать руководство пользователя страница 54

Chapter

 5

ONLINE HELP SOPAS

LECTOR®620

54

©

 SICK AG · Germany · All rights reserved · Subject to change without notice

8013778/Y269/2013-11-27

Parameters

5.7.7.1.2

Transmit start/stop 

If the 

Transmit start/stop

 parameter is activated, the start and stop characters are trans-

mitted together with the code contents.
 
As a result, the characters are available for evaluation of the reading results.

5.7.7.1.3

Full ASCII

The 

Full ASCII

 parameter must be activated if the code contains both digits and other cha-

racters.

5.7.7.1.4

Check digit test

This 

Check digit test

 parameter is used to define the calculation method for the plausibility 

check on the code contents. A check digit is calculated from the code contents and compa-
red with the check digit in the code. The selected method must match the method used du-
ring creation of the code. If the calculated check digit matches the check digit in the code, 
the reading is regarded as a G

OOD

 R

EAD

).

 

 Check digits prevent misinterpretations and increase reading reliability.

5.7.7.1.5

C32 conversion

If the 

C32 conversion

 parameter is activated, decoding is activated for the code type.

 

 As only activated code types are processed, you can increase the processing speed by 

specifically activating/deactivating the required code types.

 
• Code name: 

C32 conversion

 (two-value)

• Character set: 32 alphanumeric characters (upper case letters A - Z, digits 0 - 9, no special 
characters)
• Structure: Leading light zone, start character, message characters, check digit, stop cha-
racter, closing light zone (13 - 16 modules per character)
• Intrinsic reliability: High
• Space required: Variable symbol length
• Standard: ISO/IEC 16388, ANSI/AIM BC5 1995
• Area of application: Article number for pharmaceutical products (Italian pharmaceutical 
code), drug packaging for human medicine

Содержание Lector 620







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды