3 D D R I V E R A S S I S TA N C E S Y S T E M | 3 V I S T O R - P
8018167 / 2015-03-31 | S I C K A G
Subject to change without notice
6 5
CONFIGURATION AND OPERATION
16. Specify the values for the sensor position and orientation. The origin of the coordi-
nates is at the top left-hand corner of the vehicle.
Parameter
Description
Flipped view
Flips the current view of the sensor head so that it
appears back to front on the HMI display
Angle
Installation angle of the sensor head in relation to
the horizontal
Height
Installation height of the sensor head (in relation to
the center of the lenses)
Location and positioning
X = distance from left-hand edge of vehicle
Y = distance from front edge of vehicle
Slider = orientation of sensor head in degrees
(0°: to the front, 90°: to the left, 180°: to the rear,
270°: to the right)
Alarm
Alarm response, dependent on gear selected.
"Activated" means that an alarm will be output if the
detection zone is violated when this gear is selected.
Sharp slopes
Alarm response, dependent on steep ascending
slopes. Active: Improves detection on terrain with
ascending slopes.
Near detection
ON: Improves detection within a close-up range of
0.3 m to 0.7 m, but reduces the accuracy in the 5 m
to 6 m range.
