Sibata 090860-0341, Руководство по эксплуатации

Страница: 23 / 44

- 21 -
Pressing the START/STOP key again starts pump operation in the volume timer mode.
The operation display LED flashes (orange), the "timer standing by" icon is displayed on screen, and
the remaining sampling start time is displayed.
* If the START/STOP key is pressed when the start time is set to "0.00", pump operation starts
immediately.
Pressing the UP key switches the screen cyclically as follows: flow volume setting → volume timer
→ remaining sampling start time. Pressing the DOWN key switches the screen in the reverse
direction.
Pump operation starts when the remaining sampling start time reaches "0.00".
During pump operation, the operation display LED flashes (green), the pump operation mark lights,
and the instantaneous flow rate is displayed.
Pressing the UP key during pump operation switches the screen cyclically as follows: integrated flow
volume
→ average flow rate → sampling time → remaining integrated flow volume → instantaneous
flow rate. Pressing the DOWN key switches the screen in the reverse direction.
Holding down the KEY LOCK key during pump operation displays the key icon and disables use of
the START/STOP key.
* The above items can be checked by using the UP/DOWN key. To cancel the key lock, hold down
the KEY LOCK key again. The key icon goes out and the key lock is canceled.
When the preset integrated flow volume is reached, pump operation stops and the integrated flow
volume screen is displayed.
For details, see page 26 "After Ending Operation."
* Pump operation can be forcibly stopped by pressing the START/STOP key.
Remaining sampling start time
Volume timer Flow rate setting
Instantaneous flow rate
Remaining integrated
flow volume
Integrated flow volume
Sampling time
Average flow rate